pH analyzer sensor

Description

Widescreen LCD display, with operation prompt function, easy to use.
Using 32-bit microprocessor technology, with automatic temperature compensation.
It adopts a lithium battery power supply and has the power management function of charging and power failure protection.
Low power consumption design, the backlight is turned on and off automatically by external light.
The protection grade is IP65, waterproof and dustproof.
Three kinds of pH buffer reagents can be selected for one-point or two-point calibration of the instrument.

Measuring range	pH	(0.00-14.00)рH
	mV	(-1999.9~1999.9)mV
	Temp	(0.0-80.0) ℃ (32-176)℉
Resolution	pH	0.01 pH
	mV	0.1 mV
	Temp	0.1 ℃(0.1℉)
Accuracy	pH	≤±0.02pH
	mV	≤±0.1%F.S
	Temp	≤±0.5°C
pH temperature automatic compensation range		0.0-60.0℃（32-140℉）
Protection grade		IP65
Power supply		Polymer lithium battery
Size		165 x75x51mm
Weight		270g(without electrodes)

Before and after use, the electrode should be cleaned with pure water to ensure the accuracy of the measurement. After the measurement using a viscous sample, the electrode needs to be cleaned with hot pure water
Electrodes should be cleaned with pure water after intermittent use and not come into contact with oil and organic silicone substances.
After a period of long-term use, the electrode can be cleaned in 4% HF solution for 3-5 seconds or in dilute HCl solution for 1-2 minutes. After washing with pure water, soak in potassium chloride (3mol/L) solution for 14 hours

Brand	Lohand Biologic
Product Application	Environmental Research, Environmental Studies, pH Analysis Instruments, Water Analysis Systems

Only logged in customers can leave a review.

There are no questions yet. Be the first to ask a question about this product.